产品中心

1、显示面板“ ”：开关机键，在开机状态下按下此键，控制器关机，在关机状态下按下此键，控制器开机，同时点亮面板开/关机指示灯； 

 2、显示面板“O3”：臭氧建，在开机状态下按下此键，实现臭氧的开启和关闭，当开启臭氧功能是，面板的臭氧指示灯点亮；

 3、显示面板“冲浪”：冲浪按键，在开机状态下按下此键，进入或者退出冲浪功能，当进入冲浪功能时，风速按照由大到小，再由小到大，循环变化，控制面板同时点亮冲浪指示灯；

 4、显示面板“定时”：定时键，在开机状态下按下此键，进入或者退出定时状态，当存在定时状态时，显示面板的定时灯点亮； 

5、显示面板“ ”、“ ”：向上及向下键，在定时时间调整状态下，向上或向下键是调整定时时间，不在定时时间调整状态下，向上或向下键为风速调整键，实现风速的增加或者减小；

 6、遥控器按键功能与显示面板按键功能类似，但将风速和定时调整分开，分别用“风速+”“风速-”调整风速大小，“定时+”“定时-”调整定时分钟数据。 

 1. Display panel "": On/Off key. Press this key when the controller is turned on, and the controller will be turned off. Press this key when the controller is turned off, and the panel on/off indicator light will be lit at the same time;

 2. Display panel "O3": Ozone is activated. Press this button when the device is turned on to turn on and off ozone. When the ozone function is turned on, the ozone indicator on the panel lights up; 

3. Display panel "Surf": Surf button. Press this button when the computer is turned on to enter or exit the surfing function. When entering the surfing function, the wind speed changes in a cycle from high to low, then from low to high. The control panel also illuminates the surfing indicator light;

 4. Display panel "Timing": Timing key, which is pressed when the machine is turned on to enter or exit the timing state. When there is a timing state, the timing light on the display panel lights up;

 5. Display panels "" and "": Up and down keys. In the timing time adjustment state, the up or down keys are used to adjust the timing time. When not in the timing time adjustment state, the up or down keys are used as wind speed adjustment keys to achieve an increase or decrease in wind speed; 

6. The function of the remote control button is similar to that of the display panel button, but it separates the wind speed and timing adjustment, using "Wind Speed+" and "Wind Speed -" to adjust the wind speed, and "Timing+" and "Timing -" to adjust the timing minute data.