产品中心

1、显示面板“ ”：开关机键，在开机状态下按下此键，控制器关机，在关机状态下按下此键，控制器开机，同时点亮面板开/关机指示灯；                                         
2、显示面板“O3”：臭氧建，在开机状态下按下此键，实现臭氧的开启和关闭，当开启臭氧功能是，面板的臭氧指示灯点亮；
3、显示面板“冲浪”：冲浪按键，在开机状态下按下此键，进入或者退出冲浪功能，当进入冲浪功能时，风速按照由大到小，再由小到大，循环变化，控制面板同时点亮冲浪指示灯；
4、显示面板“定时”：定时键，在开机状态下按下此键，进入或者退出定时状态，当存在定时状态时，显示面板的定时灯点亮；
5、显示面板：向上及向下键，在定时时间调整状态下，向上或向下键是调整定时时间，不在定时时间调整状态下，向上或向下键为风速调整键，实现风速的增加或者减小；
6、遥控器按键功能与显示面板按键功能类似，但将风速和定时调整分开，分别用“风速+”“风速-”调整风速大小，“定时+”“定时-”调整定时分钟数据。

1. Display panel "": on / off key. Press this key in the power on state to turn off the controller. Press this key in the power off state to turn on the controller and turn on the panel on / off indicator at the same time;
2. Display panel "O3": when ozone is built, press this key in the startup state to turn on and off ozone. When the ozone function is turned on, the ozone indicator light on the panel is on;
3. "Surfing" on the display panel: press the surfing button in the power on state to enter or exit the surfing function. When entering the surfing function, the wind speed changes from large to small, and then from small to large, and the control panel lights up the surfing indicator at the same time;
4. "Timing" on the display panel: timing key. Press this key in the power on state to enter or exit the timing state. When the timing state exists, the timing light on the display panel will be on;
5. When the "" key is used to adjust the wind speed up or down, or when the "" key is used to adjust the wind speed up or down, the time will not be adjusted up or down, or when the "" key is used to adjust the wind speed up or down;
6. The key function of the remote controller is similar to that of the display panel, but the wind speed and timing adjustment are separated. Adjust the wind speed with "wind speed +" wind speed - "and" timing + "timing -" to adjust the timing minute data.